Научные публикации

За 2019 год:

  1. Скворцова, С.В. Влияние дополнительного легирования водородом на структуру и фазовый состав интерметаллидного сплава ВТИ-4/Скворцова С.В., Пожога О.З., Пожога В.А., Иванов А.Е.//Металлы.-2019.-№6.-С. 3-13
  2. Коллеров, М.Ю. Получение пористых материалов и покрытий из волокон титана методами диффузионной сварки и термоводородной обработки /Коллеров М.Ю., Овчинников А.В., Герман М.А., Агаркова Е.О. // Титан. — №2. — 2019.  — С. 17-22.
  3. Мамонов, А.М. Влияние термоводородной обработки, пластической деформации и вакуумного ионно-плазменного азотирования на фазовый состав, текстуру и твердость титанового сплава с интерметаллидным упрочнением / А.М. Мамонов,  С.С. Слезов, Е.О. Агаркова, А.П. Нейман, С.М. Сарычев, А.В. Нейман // Титан. -2019. -№ 1 (63). -С. 31-36.
  4. Gusev, D.E. Effect of a Structure and Test Conditions on the Critical Strains and Stresses in Titanium Nickelide–Based Alloys / D.E. Gusev, M.Yu. Kollerov, R.E. Vinogradov // Russian Metallurgy (Metally). — 2019. -No. 4. -P. 309–314.
  5. Kollerov, M.Y. Mechanical Properties of a Carbon Fiber Reinforced Plastic–Titanium Nickelide Functional Composite Material /  Kollerov M.Y., Spektor, V.S., Skoblin A.A. [et al.] // Russian Metallurgy (Metally). — V. 2019(4). — P. 331-335
  6. Gusev, D.E. Creep of a Titanium Nickelide-Based Alloy during Torsional Deformation / Gusev D.E., Kollerov M.Y., Sharonov A.A. [et al.] // Russian Metallurgy (Metally). — 2019. — V. 2019(3), P.  223-231
  7. Kollerov, M.Y. Functional Properties of Nickel–Titanium/Silicone Rubber Composite / Kollerov M.Y., Lukina E.A., Gusev D.E., Borisov A.A. // Inorganic Materials: Applied Research. — 2019. — V. 10(1). -P. 231-236
  8. Коллеров, М.Ю. Термомеханическое поведение сплавов на основе никелида титана при постоянном противодействии/Коллеров М.Ю., Гусев Д.Е., Гуртовой С.И., Бурнаев А.В. //Металлы. — 2019. — № 5. — С. 17-25.
  9. Коллеров, М.Ю. Влияние содержания никеля и примесей на структуру и температуры эффекта памя-ти формы сплавов на основе никелида титана / Коллеров М.Ю., Гусев Д.Е., Чернышова А.А., Гуртовой С.И., Виноградов Р.Е. // Титан. — 2019. — №1. — C. 7-14.
  10. Ivanov, D.A. Preparation of porous ceramic based on Al2O3 as a result of zonal compaction during sintering of powder workpieces of very fine aluminum powder PAP-2 combustion products / D.A. Ivanov, A.I. Sitnikov, G.E. Val´yano, T.I. Borodina, S.D. Shlyapin // Refractories and industrial ceramics. – 2019. — №5. —  v. 59. — P. 459 — 465.
  11. Ivanov, D.A. Peculiarities of granulation of the PAP-2 aluminum powder in the technology of the Al-Al2O3 powder composite with a layered structure / D.A. Ivanov, S.D. Shlyapin, G.E. Val´yano, L.V. Fedorova // Russian journal of non-ferrous metals. – 2019. – v. 60. — № 1. – P. 81 – 86.
  12. Betsofen, S.Y. Influence of Alloying Elements on the Deformation Mechanism and the Texture of Magnesium Alloys / Betsofen, S.Y. Osintsev O. E., Grushin I. A. [et al.] // Russian metallurgy. -2019. -V.4. -P. 346-360
  13. Betsofen, S.Y. Texture and Anisotropy of the Mechanical Properties of Magnesium Alloys / Betsofen, S.Y. Osintsev O. E., Grushin I. A. [et al.] // Russian metallurgy. -2019. -V.4. -P. 361-373
  14. Qian, B.Y. Influence of Voltage on the Corrosion and Wear Resistance of Micro-Arc Oxidation Coating on Mg–8Li–2Ca Alloy / Qian B.Y., Miao W., Qiu M. [et al.] // Acta Metallurgica Sinica (English Letters). -2019. -V. 32. -Is. 2. -P. 194-204
  15. Lenkovets, A.S. Research of the influence of bias voltage on structure and residual stresses in W-coatings deposited on a copper substrate by inverted magnetron / Lenkovets A.S., Lozovan A.A., Ya. Betsofen S. [et al.] // Journal of Physics: Conference Series. -2019. -V. 1281. -Is. 1. -012047

За 2018 год:

  1. Vasenev, V.V. Development of the Aluminum Powder Composite Based on the Al-Si-Ni System and Technology of Billet Fabrication of This Composite / Vasenev V.V., Mironenko V.N., Butrim V.N. [et al.] // Russian Journal of Non-Ferrous Metals. -2018. -V. 59. -Is. 6. -P. 677-684
  2. Betsofen, S.Y. Phase Composition Formation in a V-1469 Alloy (Al-Cu-Li System) during Friction Stir Welding / Betsofen S.Y., Sbitneva S.V., Panteleev M.D. [et al.] // Russian Metallurgy (Metally). — 2018.  -Vol. 2018. -Is. 11. -P. 1059-1066
  3. Betsofen, S.Ya. Structural features of titanium, aluminum and magnesium alloys with rare earth elements / S.Ya. Betsofen, S.V. Skvortsova, I.A. Grushin // Journal of Physics: Conference Series. -2019. -Vol. 1396. -UNCP 012010
  4. Betsofen, S.Ya. Structural features of V-1469 alloys compounds producedby friction stir welding / S.Ya. Betsofen, M.I. Gordeeva // Journal of Physics: Conference Series. -2019. -Vol. 1396. -UNCP 012011
  5. Lenkovets, A.S. Study of the bias voltage influence on the structure, texture and residual stresses in Ta coatings deposited on a copper substrate of inverted magnetron / A.S. Lenkovets, A.A. Lozovan, S.Ya. Betsofen  [et al.] // Journal of Physics: Conference Series. -2019. -Vol. 1396. -UNCP 012028
  6. Lozovan, A.А. Study of the ion assisted sputtering process parameters influence on the structure and morphology of TiPb coatings / A.А. Lozovan, S.Y. Betsofen, M.A. Lyakhovetskiy [et al.] // Journal of Physics: Conference Series. -2019. -Vol. 1396. -UNCP 012029
  7. Бецофен, С.Я. Особенности формирования остаточных напряжений в сварном соединении и наплавке из стеллита на рельсовой стали / Бецофен С.Я., Григорович К.В., Ашмарин А.А. [и др.] // Физика и химия обработки материалов. -2019. -№ 3. -C. 31-39
  8. Бердин, Н.В.  Формирование микрокристаллической структуры сплава ВТ5-1 в условиях одноосного сжатия при 800 и 900 C / Н. В. Бердин, С. Я. Бецофен, А. М. Смыслов [и др.] // Деформация и разрушение материалов. -2019. -№ 11. -С. 20-30
  9. Lozovan, A.A. Structure and properties of solid lubricating coatings based on the TiN-Pb system / Lozovan A.A.,  Lesnevsky L.N.,   Betsofen S.Ya. [et al.] // IOP Conference Series: Materials Science and Engineering. -2018. -V. 387. -Is. 1. -UNSP 012048
  10. Lozovan, A.A. Study of a variable deposition angle effect on the structure of Ti-Pb composite coatings / Lozovan A.A., Betsofen S.Ya., Alexandrova S.S. [et al.] // IOP Conference Series: Materials Science and Engineering. -2018. -V. 387. -Is. 1. -UNSP 012049
  11. Serov, M.M. Change of the casting magnesium alloys structure during the melt solidification on rotating heat receiver / Serov M.M.,  Moisee, V.S,  Betsofen S.Ya. [et al.] // Journal of Physics: Conference Series. -2018. -V. 1121.  -Is. 1. -UNSP 012028
  12. Lozovan, A.A. Research of the effect of bias voltage on the morphology, structure and lattice spacings of the Nb coatings deposited by inverted magnetron / Lozovan A.A.,   Betsofen S.Ya., Lenkovets A.S. [et al.] // Journal of Physics: Conference Series. -2018. -V. 1121. -Is. 1. -UNSP 012019
  13. Бецофен, С.Я. Влияние легирующих элементов на механизм деформации и текстуру магниевых сплавов / Бецофен С.Я., Осинцев О.Е., Грушин И.А. [и др.] // Деформация и разрушение материалов. -2018. -№ 8. -С. 2-17
  14. Бецофен, С.Я. Закономерности формирования текстуры и анизотропии механических свойств магниевых сплавов / Бецофен С.Я., Осинцев О.Е., Грушин И.А. [и др.] // Деформация и разрушение материалов. -2018. —  № 9. -С. 2-15
  15. Kollerov, M.Y., Ilyin, A.A., Runova, Y.E., Popov, N.A. Effect of Modes of Diffusion Welding and Thermohydrogen Treatment on the Structure and Properties of Porous Coatings from Titanium Fibers on a Monolithic Substrate from Alloy VT6 / Metal Science and Heat Treatment //2018, №2 (752), pp. 30-35.
  16. Kollerov, M.Y., Runova, Y.É., Zasypkin, V.V., Popov, N.A. Features of Thermal Diffusion Impregnation with Hydrogen of Porous Material Based on Titanium / Metal Science and Heat Treatment // 2018, №5 (755), pp. 12-17.
  17. Анализ возможностей преобразования пластинчатых структур титановых и циркониевых сплавов методами термоводородной обработки/А.М. Мамонов [и др.]//Металловедение и термическая обработка металлов.-2018.-№2(752).-С.22-29
  18. Влияние вакуумной ионно-плазменной обработки на структуру поверхностного слоя, коррозионную и эрозионную стойкость титанового сплава с интерметаллидной α2-фазой/А.М. Мамонов [и др.]//Металловедение и термическая обработка металлов.-2018.-№5(755).-С.17-24
  19. Гусев, Д.Е. Влияние структуры на механизмы ползучести в сплавах на основе никелида титана/Гусев Д.Е., Коллеров М.Ю., Шаронов А.А., Нейман А.П. // 2018. — Титан. —  № 2 (60). — С. 19-25.
  20. Effect of Vacuum Ion-Plasma Treatment on Surface Layer Structure, Corrosion and Erosion Resistance of Titanium Alloy with Intermetallic α2 -Phase/A.M. Mamonov [et al.] //Metal Science and Heat Treatment.-2018.-№59(2).-Р.290-296
  21. Analysis of the Possibilities of Transformation of Lamellar Structures of Titanium and Zirconium Alloys by Methods of Thermohydrogen Treatment/A.M. Mamonov [et al] // Metal Science and Heat Treatment.-2018.-Vol.60. issue 1-2.-P.80-88
  22. Mamonov, A.M. Controlling the Phase Composition, Structure, and Complex of Properties of the High-Modulus Titanium/A.M. Mamonov, S.S. Slezov, O.N. Gvozdeva //Russian Journal of Non-Ferrous Metals.-2018.-Vol.59 issue 2.-P. 181-189
  23. Skvortsova, S. V. Effect of Heat Treatment on the Structure and Properties of Sheet Semifinished Products Made of a Heat-Resistant Alloy Based on Titanium and Alloyed with Rare-Earth Metal / Skvortsova S. V., Grushin I. A., Speranskiy K. A. [et al.] // Russian Journal of Non-Ferrous Metals. -2018. -Vol. 59. -No. 2. -P. 157–162
  24. Skvortsova, S.V. The study of structure development regularities in VT35 alloy after strengthening thermal processing / Skvortsova S.V., Gvozdeva O.N., Orlov A.A. [et al.] // International Journal of Civil Engineering and Technology. -2018. -Vol. 9. -Is. 11. -P. 1471-1478
  25. Скворцова, С.В. Исследование влияния параметров термической обработки на структуру и свойства (альфа+бета)- титанового сплава / Скворцова С.В., Гвоздева О.Н., Ручина Н.В. и др. // Титан. -2018. -№4. -С. 13-18
  26. Скворцова, С.В. Закономерности формирования структуры и текстуры в процессе изготовления прутков из (альфа+бета)- титанового сплава и их влияние на комплекс механических свойств / Скворцова С.В., Гвоздева О.Н., Луговской В.А., Шалин А.В., Грушин И.А. // Титан. -2018. -№4. -С. 46-51
  27. Ivanov, D.A. Investigation of the formation of a fine-crystalline alumina coating on the surface of a blank aluminum powder coating test panel as a result of its filtration combustion / D.A.Ivanov, A.I.Sitnikov, G.E. Val´yano, S.D. Shlyapin//Refractories and industrial ceramics. — 2018. — Vol. 59. — Issue 1. — P. 42-47
  28. Иванов, Д.А. Изучение процесса формирования мелкокристаллического алюмооксидного покрытия на поверхности алюминиевой порошковой заготовки в результате ее фильтрационного горения/ Д.А. Иванов, А.И. Ситников, Г.Е. Вальяно, С.Д. Шляпин//Новые огнеупоры.-2018.-№1.-С.43-48
  29. Иванов, Д.А. Получение пористой керамики на основе Al2O3 в результате зонального уплотнения при спекании порошковых заготовок из высокодисперсных продуктов сгорания алюминиевого порошка ПАП-2 / Д.А. Иванов, А.И. Ситников, С.Д. Шляпин  [и др.]//Новые огнеупоры.-2018.-№9.-С.28-34